Post by Counter Strike on Oct 31, 2006 8:22:57 GMT -5
This is a great speed up grade I up graded from a
Ni-MH 8.4v 1100mAh to a Ni-MH 1100mAh 9.6v I talked to my airsoft guy who knows theses guns in side and out because he has 25 he rents out and is always fixing them and this is the biggest battery that wont tear it up
(A good battery should set you back around $30)
1. First you need a battery bag I got mine off my tack vest it has a belt that came with 2 pistol clip holders on it I just used one of those
2.you need a wire extender to bring the hook up outside the gun no idea where to get them my airsoft guy made mine it is not featured in the picture
3. Now remove the stock by taking out the screw on the side of the retractable stock and push the pin out then take off the fore grip and and push the wires that are in there back in to the gun and unhook the hook up thats right behind where the stock was
4. Drill a hole at the bottom of the retractable stock Make sure you take the stock off first
5. now hook the wire extender to the plug you just unhooked
and push it through the hole you just drilled and put the stock back on (there are two little pieces you need to make sure you put them back the exact same way they were)
[glow=red,2,300]There will be pictures when I get around to it[/glow]
Ni-MH 8.4v 1100mAh to a Ni-MH 1100mAh 9.6v I talked to my airsoft guy who knows theses guns in side and out because he has 25 he rents out and is always fixing them and this is the biggest battery that wont tear it up
(A good battery should set you back around $30)
1. First you need a battery bag I got mine off my tack vest it has a belt that came with 2 pistol clip holders on it I just used one of those
2.you need a wire extender to bring the hook up outside the gun no idea where to get them my airsoft guy made mine it is not featured in the picture
3. Now remove the stock by taking out the screw on the side of the retractable stock and push the pin out then take off the fore grip and and push the wires that are in there back in to the gun and unhook the hook up thats right behind where the stock was
4. Drill a hole at the bottom of the retractable stock Make sure you take the stock off first
5. now hook the wire extender to the plug you just unhooked
and push it through the hole you just drilled and put the stock back on (there are two little pieces you need to make sure you put them back the exact same way they were)
[glow=red,2,300]There will be pictures when I get around to it[/glow]
